Huawei Mate 30 & Mate 30 Pro Manual / User Guide


Huawei Mate 30 & Mate 30 Pro Manual Support – The Huawei Mate 30 has a shape and design not much different from the Mate 30 Pro using the 6.62-inch OLED panel with a resolution of 1080 x 2340 pixels and an IP53 rating and supports HDR10 and DCI-P3. The screen is more flat with a notch smaller than the Mate 30 Pro, and there is an in-display fingerprint sensor.

The hardware uses the latest Kirin chipset, Kirin 990, and will be available in two variants is Kirin 990 4G and Kirin 990 5G. The difference between the two is related to the clock speed, and Kirin 990 5G uses 2 Big Core + 1 Tiny Core instead of using 1 Core, respectively. The Chipset is powered by 8GB of RAM and a 128GB internal capacity that can still be expanded with Nano memory.

The primary camera consists of 3 cameras that are 40MP (SuperSensing Wide) + 16MP (Ultra Wide) + 8MP Tele with 3x optical zoom and 5x hybrid zoom. All three are supported with OIS and AIS for better shooting stabilization and video recording. While for the front camera, it consists of a dual-resolution camera of 24MP + 3D TOF camera.

While the Huawei Mate 30 Pro carries a screen size of 6.53 Inc with Horizon Display, which has an arch on its screen side 88 degrees, the panel uses OLED with a resolution of 1176 x 2400 pixels, HDR support, and DCI-P3 color gamut. Its main Display Always has On mode and has a Huawei M-Pen stylus support.

The device has a primary camera consisting of four setups that resolution 40MP + 8MP + 40MP and 3D ToF. The camera is capable of recording 4K 60fps video, slow motion with 7680fps at 720p, timelapse 4K with HDR + color, and low light with ISO in 52,000.

The front camera is 32MP resolution with the latest 3D scanning hardware, as well as the most accurate detection sensors to support Huawei’s NPU Da Vinci capabilities.

The Huawei Mate 30 Pro supported the Kirin 990 chipset with a 7nm + EUV architecture with the Mali-G76 MP16 GPU and the latest version of GPU Turbo support for better mobile gaming acceleration. The device will have an 8GB RAM with internal storage varying from 128GB to 256GB, and can still be expanded with a separate NM card.

The Huawei Mate 30 Pro uses a 4500mAh battery capacity with a charging capability of up to 40W wired and 25W Wireless. Both of these devices will use EMUI 10 with Android 10 based, and have Huawei’s services instead of still using Google Play Services.